Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
- 13. Brake system
   13.1. Specifications
   13.2. Antiblocking system of brakes (ABS)
   13.3. Prorolling of hydraulic system of a drive of brakes with scanner use
   13.4. Check and adjustment of position of a pedal of a brake
   13.5. Check of the vacuum amplifier of brakes
   13.6. Prorolling of hydraulic system of a drive of brakes
   13.7. Adjustment of a course of a lay brake
   13.8. The vacuum amplifier of brakes
   13.9. Brake tubes and hoses
   13.10. A pressure regulator
   13.11. A brake pedal
   13.12. Replacement of lobbies brake колодок
   13.13. A support of a forward brake
   13.14. The main brake cylinder
   13.15. Replacement brake колодок on back drum-type brakes
   13.16. Replacement of the working brake cylinder
   13.17. A lay brake
   13.18. Hydraulic block HECU ABS
   13.19. The gauge of frequency of rotation of a wheel
   13.20. Search and elimination of malfunctions
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes




13.4. Check and adjustment of position of a pedal of a brake

PERFORMANCE ORDER
1. Turn the switch of stoplights before reception of a demanded backlash between the switch and a brake pedal then tighten a counternut of fixing of the switch.

Backlash between a pedal and the switch of stoplights: 0,5–1,0 mm

2. With the switched off engine press a brake pedal some times to clean any люфты in system. A hand press a pedal of a brake before occurrence of notable resistance and measure a free course of a pedal.

Free course of a pedal of a brake: 3–8 mm

3. Start the engine and press a pedal of a brake effort of 50 kg, and measure distance from a floor to the centre of a pillow of a pedal of a brake.

The minimum distance of a pedal of a brake from a floor: 70 mm
When the pedal is completely pressed without a brake liquid: 50 mm