Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
- 6. Fuel system
   6.1. Specifications (SOHC and DOHC)
   6.2. Check of the fuel pump
   6.3. Check of the pressure created by the fuel pump
   6.4. Checks of system of injection MFI
   6.5. A control lamp of malfunctions (MIL)
   6.6. Diagnostic codes of malfunctions ŤOBD-IIť
   6.7. Diagnostic codes of malfunctions, except ŤOBD-IIť
   6.8. Replacement of the fuel filter
   6.9. Replacement of the terminator of overflow (the double-thread valve)
   6.10. Replacement of the gauge of level of fuel
   6.11. A control system of engine MFI
   6.12. Fuel atomizers
   6.13. Throttle knot
   6.14. The power supply system with the carburettor
   6.15. Check of frequency of rotation of idling
   6.16. Adjustment of frequency of rotation of idling
   6.17. Frequency of rotation of idling and adjustment of a fuel mix
   6.18. Check and starting arrangement adjustment
   6.19. Check and adjustment of a free course of a cable of an accelerator
   6.20. A fuel tank
   6.21. The canister of catching of steams of fuel
   6.22. Replacement of the fuel filter
   6.23. The carburettor
   6.24. A cable and an accelerator pedal
   6.25. Search and elimination of malfunctions of fuel system with the carburettor
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes




6.15. Check of frequency of rotation of idling

Check conditions

Headlights, the electric fan of a radiator and all electric consumers should be switched off, and the transmission should be established in neutral position.

PERFORMANCE ORDER
1. The engine should be прогрет to temperature of a cooling liquid 80–95°C.
2. Start up the engine and leave it to work on frequency of rotation of a cranked shaft idling.
3. Check up installation of a corner of an advancing of ignition and, if necessary, adjust it.
4. Make a trip on the car during 5 mines for the speed of 48 km/hour or no more than on 5 with increase frequency of rotation of a cranked shaft to 2000–3000мин–1.
5. Then allow to the engine to work idling within 2 minutes
6. On a tachometre define frequency of rotation of idling.

Frequency of rotation of idling of the engine of 1,3 l with a mechanical transmission: 850ą100 mines-1 at coal of an advancing of ignition 5ą 5 °