Hyundai Accent

Repair and car operation

Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
- 6. Fuel system
   6.1. Specifications (SOHC and DOHC)
   6.2. Check of the fuel pump
   6.3. Check of the pressure created by the fuel pump
   6.4. Checks of system of injection MFI
   6.5. A control lamp of malfunctions (MIL)
   6.6. Diagnostic codes of malfunctions «OBD-II»
   6.7. Diagnostic codes of malfunctions, except «OBD-II»
   6.8. Replacement of the fuel filter
   6.9. Replacement of the terminator of overflow (the double-thread valve)
   6.10. Replacement of the gauge of level of fuel
   6.11. A control system of engine MFI
   6.12. Fuel atomizers
   6.13. Throttle knot
   6.14. The power supply system with the carburettor
   6.15. Check of frequency of rotation of idling
   6.16. Adjustment of frequency of rotation of idling
   6.17. Frequency of rotation of idling and adjustment of a fuel mix
   6.18. Check and starting arrangement adjustment
   6.19. Check and adjustment of a free course of a cable of an accelerator
   6.20. A fuel tank
   6.21. The canister of catching of steams of fuel
   6.22. Replacement of the fuel filter
   6.23. The carburettor
   6.24. A cable and an accelerator pedal
   6.25. Search and elimination of malfunctions of fuel system with the carburettor
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes

6.24. A cable and an accelerator pedal

1 – шплинт;
2 – an accelerator cable;
3 – an arm;
4 – a socket of the switch of an accelerator of cars with an automatic transmission;

5 – a bolt, 8–12 Н•м;
6 – a returnable spring;
7 – an accelerator pedal.

Removal

Accelerator cable

PERFORMANCE ORDER

1. Ослабьте an adjusting nut of a cable of an accelerator.
	2. Disconnect a cable of an accelerator from the lever throttle заслонки.
3. Disconnect a cable of an accelerator from the lever of a pedal of an accelerator.
4. Turn out two bolts of fastening of a cover of a cable of an accelerator to a partition of a motor compartment and remove it from the car.

Accelerator pedal

PERFORMANCE ORDER

1. Ослабьте an adjusting nut of a cable of an accelerator, disconnect a cable of an accelerator from the lever of a pedal of an accelerator and remove a pedal.
2. Remove a returnable spring of a pedal of an accelerator.
	3. Take шплинт from an axis of a pedal of an accelerator and remove a pedal of an accelerator from an arm.

Check

PERFORMANCE ORDER

1. Check up a cable of an accelerator and a cable cover on absence of damages.

2. Check up smoothness of moving of a cable of an accelerator in a cover.

3. Check up an accelerator pedal on absence of a bend.

4. Check up a condition of a returnable spring.

5. Check up a condition of a tip of a cable of an accelerator.

Installation

PERFORMANCE ORDER

1. Grease консистентной with greasing J310a NLGI of a point of turn of a pedal of an accelerator.

2. For prevention of hit of steams and the fulfilled gases in car salon put hermetic on a carving of bolts of fastening of an arm of a pedal of an accelerator.

3. Be convinced, that the cable of an accelerator has no sharp excesses.

4. Check up люфт an accelerator cable.

5. Establish all details and fix bolts and nuts, having tightened their demanded moments.