Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
- 3. Greasing system
   3.1. Specifications
   3.2. An engine oil choice
   3.3. The gauge of pressure of oil
   3.4. Check of level of engine oil
   3.5. Engine oil replacement
   3.6. Replacement of the oil filter
   3.7. The oil pump of engine SOHC
   3.8. The oil pump of engine DOHC
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
+ 10. Axes and power shafts
+ 11. A suspension bracket
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes




3.6. Replacement of the oil filter

All engines are equipped by the high-quality, disposable oil filter.


The prevention

At replacement of the motor filter be careful, as oil is hot and it is possible to burn.


PERFORMANCE ORDER
1. A special key turn out the oil filter. If the rubber sealing ring of the oil filter remains on the block of cylinders, remove it.
2. Grease with a thin layer of pure engine oil a rubber sealing ring of the new oil filter.
3. Screw the oil filter before contact of a sealing ring of the oil filter with the block of cylinders then tighten it by hand.
4. Start up the engine and check up absence of leaks of oil.
5. Switch off the engine and wait for 5 mines for oil running off in the pallet. Check up level of engine oil and, if necessary, finish it to norm.