Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. The maintenance instruction
+ 2. The engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. The control, toxicity decrease
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. A transmission
- 10. Axes and power shafts
   10.1. Specifications
   10.2. A power shaft
   10.3. A power shaft with SHRUS ball and Birfield type
   10.4. A power shaft with SHRUS Birfield and трипоидного type
   10.5. A rotary fist and a nave of a forward wheel
   10.6. A back axis
   10.7. Search and elimination of malfunctions
+ 11. A suspension bracket
+ 12. A steering
+ 13. Brake system
+ 14. A body
+ 15. A central air
+ 16. The electric equipment
+ 17. The appendix
+ 18. Electroschemes




10.4. A power shaft with SHRUS Birfield and трипоидного type

1 – cтопорное a ring;
2 – the SHRUS трипоидного type;
3 – cтопорное a spring ring;
4 – a support of rollers трипоидного connections;
5 – a protective cover;
6 – a collar;
7 – a collar;
8 – a nut, 220–260 Н•м;
9 – a dustproof ring;
10 – SHRUS Birfield;
11 – a protective cover;
12 – a collar;
13 – a collar;
14 – dynamic демпфер;
15 – a clip dynamic демпфера.

Dismantling

The prevention

Do not assort the SHRUS of type Birfield.
For greasing of SHRUS use only special greasing.
At SHRUS assemblage it is necessary to establish new collars.


PERFORMANCE ORDER
1. Remove collars and pull together a protective cover from a ball SHRUS of a power shaft.

The prevention

Be careful not to damage a protective cover.


2. Special пассатижами remove a lock ring and a hammer through a brass core bring down a support of rollers трипоидного connections from a power shaft.

The prevention

At removal of a support of rollers трипоидного connection with a power shaft do not establish a brass core on rollers.


3. Clear a support of rollers трипоидного connections.
4. Remove collars and pull together protective covers of a ball SHRUS and SHRUS Birfield.

The prevention

If the protective cover is repeatedly used before removal of a cover for its protection, wrap up шлицы a power shaft a sticky tape.



Check

PERFORMANCE ORDER
1. Check up a condition шлицов a power shaft.
2. Check up on absence of traces of a rust, water and extraneous subjects in a protective cover of SHRUS Birfield.
3. Check up a support of rollers трипоидного connections on absence of deterioration or corrosion.
4. Check up deepening in SHRUS Birfield on absence of deterioration or corrosion.
5. Check up dynamic демпфер on absence of damages.

Assemblage

PERFORMANCE ORDER
1. Before installation of a cover for its protection wrap up шлицы a power shaft from the party трипоидного the hinge a sticky tape.
2. Put greasing on a power shaft and establish a cover.

Greasing of SHRUS Birfield: Centoplex 278M/136K TJ
Greasing трипоидного the SHRUS: KLKTJ41–182 (MS511–50, Korea KLUBER)

3. For installation dynamic демпфера arrange SHRUS Birfield on a straight line in relation to a shaft, arrange демпфер on distance 437±3 mm and fix its clip.
4. Enclose greasing in a protective cover трипоидного the SHRUS and establish a cover on the hinge.

Protective cover трипоидного the hinge:
Greasing total: 95±6 г
The hinge: 60±3 г
Protective cover: 35±3 г

5. Add in SHRUS Birfield so much greasing, how many it has been wiped during hinge check.
6. Establish covers.
7. Fix a protective cover of SHRUS Birfield collars.
8. Fix covers so that the length of a power shaft corresponded to demanded values

Length of the left power shaft:
With a mechanical transmission: 645,2±2 mm
With an automatic transmission: 648,9±2 mm
Length of the Right power shaft:
With a mechanical transmission: 930,5±2 mm
With an automatic transmission: 934,2±2 mm.